BegerCool UV Shield

Step 1 Surface Preparation

New Surface:
Completely dry the surface for at least 1 month. Moisture should be less than 14%.

Old Surface (or Repainting):
Scrub off the old paint and clear fungus and algae on surfaces with Beger Mouldfree M-001.

Caution:

Before applying your paint, wash the surfaces and remove dust, cement fragments, stains, or oil. The cracking on the wall should be filled with Beger Acrylic Filler F-200.

Step 2 Applying Primer

New Surface:

Apply BegerCool UV Shield Primer #9900 for 1 coat and leave it to dry for at least 3 hours before painting.

Old Surface:
Apply Beger Pro Quick Primer B-1900 for 1 coat and leave it to dry for at least 6-8 hours. If you need to improve surface protection, apply BegerCool UV Shield #9900 for 1 coat. 

*Moisture of more than 14% but not more than 35% should be applied to Beger WaterBlock W-010 and leave it to dry for at least 3-4 hours, then apply Beger Ultrahigh Primer B-2100 and leave it to dry for at least 6-8 hours before painting.

Step 3 Painting

Apply BegerCool UV Shield for 2 coats. Leave it to dry for at least 2-3 hours and repeat the process.