Beger Tile-Bond

Step 1 Surface Preparation 

• Clean and remove any dust and stain on the surface, and then leave it to dry completely.

Precautions: Fill the gaps with Beger Tile-Bond after tiling for at least 24-48 hours.

Step 2 Mixing Tile Grout

• Mix Beger Tile-Bond with water in a ratio of 3:1 by volume, or mix 1 kilogram (1 bag) of tile grout with 0.32-0.35 liters of water.
• Mix tile grout with water and stir thoroughly using a wooden paddle or low-speed drill, and then allow the grout to set for approximately 3-5 minutes. Stir often while applying.

Step 3 Filling Gaps

• To fill the gaps with ready tile grout, use a rubber trowel and apply the grout at a 60-degree angle to ensure that the grout stays within the gaps and does not spill out.
• After applying the grout, let it set for approximately 60 minutes. Then, remove any excess grout with a damp sponge or cloth and use a dry cloth to clean the surface.
• Leave the grout to dry completely for at least 1-3 days before using the area.