BegerShield GRIPTECH 2IN1 RUSTPROOF

Step 1 Surface Preparation

For Steel and Metal Surfaces :

The surface must be completely dry and clean before painting. Remove all grease, dirt, and contamination.

For High Tannin Wood :

Clean the surface by Beger Thinner M-77. Then, apply 1 coat of Beger Wood Sealer B-2000.

For Fiber Cement :

It is recommended to apply 1 coat of Beger Pro Quick Primer B-1900 before applying BegerShield GripTech 2in1 RustProof.

For New Concrete : 

Allow surface to dry out completely for at least 1 month and moisture content doesn't exceed 14%.

For Old Concrete :

• Remove the deteriorated paint film, eliminate mold, and apply 1 coat of Beger Mouldfree M-001.
• In the case of surface cracks, it is recommended to fill them with Beger Acrylic Filler F-200. If the cracks are larger than 2 mm, use Beger Acrylic Sealant F-001 before sanding the surface smooth.
• Clean the surface thoroughly to remove dust and various grease stains. For deteriorated or skim-coat plastered surfaces of Beger Pro Quick Primer B-1900.

Step 2 Top Coating

• Apply 2-3 coats of BegerShield GripTech 2in1 RustProof.
• For rusted metal: after removing all rust, apply 3 coats of BegerShield Griptech2in1 RustProof.

*4 times more durability than a typical enamel paint, no chalking after testing in accelerated weathering tester as ASTM G154 standard.

Recommendation

• For dark colors tinting from C or D base: apply 1 coat of BegerShield Griptech 2in1 RustProof in a shade that is one-level lighter before applying 2 coats of the desired dark color.
• It is advised to use the product up after mixing. If not, close the lid tightly and store it at an appropriate temperature.