Step 1 Surface Preparation
New Surface :
The substrate must be completely cured and dried for at least 1 month. Measure moisture which should be less than 14%. Remove all dirt, grease, oil, or any contamination completely by washing the surface with a suitable cleaner.
Old Surface (or Repainting):
Any surface problems should be repaired before applying. Clean the surface after fixing the problems.
- Powdery, chalky, and peeling surfaces must be scrubbed and cleaned with water.
- Fungus and mildew growth must be cleaned off before applying Beger Mould Free M-001. Left to dry for a day without washing off.
- For the crack width < 1 mm., apply with Beger Acrylic Filler F-200.
- For the crack width between 2 - 10 mm., apply with Beger Acrylic Sealant F-100.